Shenzhen Prolean Technology Co., Ltd.

Polishing Process Explained, learn how to Make Your Parts Shine

Polishing Process Explained, learn how to Make Your Parts Shine

Time to read: 4mins

 Mirror polishing

Mirror polishing

Overview of Polishing

Polishing is a processing method that uses mechanical, chemical or electrochemical action to reduce the surface roughness of a workpiece in order to obtain a bright, flat surface. In general, it is a finishing process on the surface of a workpiece using polishing tools and abrasive particles or other polishing media, usually followed by a very thorough cleaning of the surface prior to the process. The surface of the polished part is smooth and slightly reflective. The end result of polishing is an improved gloss and luster of the surface. A mirror-like shiny surface can also be obtained with a good polishing.

 

 

How does Polishing Work?

 How Polishing Work

Polishing is the act of removing a very thin layer from the surface being polished using a light abrasive product. Polishing removes a very thin layer, which makes the surface of the part shiny and flat. If the surface defect is deeper than what can be removed by polishing, the surface defect will still be visible, although the partial removal of the defect will make it less visible. For example, if a surface defect is 5 microns thick and only 3 microns can be removed by polishing, there will still be 2 microns left. Although the defect is 3 microns less deep and may be less visible, it may still be visible.

 

 

Benefits of Polishing

  • Ability to seal high pressure gases and liquids
  • Cosmetic use
  • Ability to use optical flatness measuring instruments
  • Reduces the amount of surface and sub-surface damage
  • Provides better uniformity for surfaces requiring epitaxial processes or deposited materials
  • Produces sharper edges on cutting tools

 

 

Types of Polishing

 

Mechanical polishing

Mechanical polishing

This polishing method is based on plastic deformation or cutting of the material surface to obtain a smooth surface by removing the polished convex surface. Mechanical polishing generally uses abrasive rods, felt wheels, and sandpaper, and is mainly manual. Rotating body and other special parts can use auxiliary tools such as turntables, and ultra-precision polishing can be used for high surface quality requirements.

Ultra-precision polishing is to use special abrasives to rotate the processed surface of the workpiece at high speed by pressing it in the polishing solution containing abrasives. A surface roughness of 0.008μm can be achieved using this technique, which is the best among various polishing methods. This method is often used for optical lens molds.

 

Advantages

High brightness

Better surface cleanability

Higher aesthetic appeal

Reduced product adhesion

Better surface finish

Disadvantages

High labor cost

Cannot handle complex part structures

Shine may be consistent and may not last long

May be susceptible to corrosion

 

Chemical polishing

 Chemical mechanical polishing

Chemical mechanical polishing

This type of polishing uses the principle that the protruding parts of the material surface are preferentially dissolved in the chemical medium, thus making the surface of the workpiece smooth after the chemical reaction is completed. The core of chemical polishing is the preparation of the polishing solution, which can achieve surface roughness of several 10 μm, but the direct result of chemical polishing is the smoothing and polishing of micro-rough parts. It also leads to parallel dissolution of the upper layer of the part.

 

Advantages of chemical polishing

Possibility to polish complex shapes as no direct manual involvement is required

High efficiency

Possibility to polish several parts at the same time

Reduced investment in equipment

Good corrosion resistance, allowing the formation of a passivation layer on the surface of the part

Disadvantages of chemical polishing

Uneven brightness

Difficult to perform heat treatment

Gas easily spills

Not environmentally friendly, may release harmful gases

Difficult adjustment and regeneration of polishing solution

 

Electrolytic polishing

Stainless steel electrolytic polishing

Stainless steel electrolytic polishing

The basic principle of electrolytic polishing is the same as chemical polishing, both use the dissolving solution to dissolve the small protrusions on the surface and get a smooth surface. However, compared with chemical polishing, the effect of cathodic reaction can be eliminated and the polishing effect is better. Electropolishing removes material from metal workpieces, reduces surface roughness and improves surface finish by smoothing out micro peaks and valleys. The process of electrochemical polishing can be divided into two steps, firstly, macro polishing, where the dissolution products diffuse into the electrolyte, making the material surface roughness decrease, rather>1μm, and then anodic polarization, making the surface brightness increase. Ra<1μm.

 

Advantages

Longer lasting luster

Consistent color inside and out

Wide range of materials can be treated

Low cost and short cycle time

Encourages less contamination

High corrosion resistance

 

Disadvantages

High fixed investment

Complex pre-polishing process

Tools and auxiliary electrodes required for complex parts

Poor versatility of electrolyte

 

logo PL

Polishing is usually the last process in manufacturing and is one of the keys to ensure that prototypes or mass production meet the standards. It is extremely important to our customers that the surface of the part is bright and flat through precise and high-quality polishing. You can check out our surface treatment services for more information.

 

Prolean Tech’s surface finishing services offer standard and popular finishes for parts. Our CNC machines and other surface finishing technologies are capable of achieving tight tolerances and high quality, uniform surfaces for all types of parts. Simply upload your CAD file for a quick, free quote and consultation on related services.


Post time: Apr-26-2022

Ready To Quote?

All information and uploads are secure and confidential.

Contact Us